Audio-Technica’s Freeway 200 Series Wireless System provides proven performance in a variety of settings. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. The ATW-R200 receiver design features an innovative docking power supply configuration. An AC power adapter housed in a compartment in the receiver uses an IEC-standard detachable power cordset. Furthering its flexibility, the power adapter may be easily removed from the receiver case, permitting its use as a conventional in-line AC adapter. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.
Audio-Technica’s Freeway 200 Series Wireless Systems are designed to provide reliable performance, easy setup and clear, natural sound quality. Each 200 Series professional VHF wireless system includes a receiver and either a body-pack transmitter or a handheld microphone/transmitter on a specific crystal-controlled frequency. A novel dipole antenna system on the receiver improves operation by providing a ground element in addition to the usual signal element.
- Easy operation and clear, natural sound quality
- Reliable performance and durable construction
- Advanced dipole antenna system for extended operating range
- Power, RF, and AF Peak indicators
- Volume control, ¼” output jack and space-saving power supply
- Rugged unidirectional dynamic element on handheld microphone/transmitter
- Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
- Professional locking connector on UniPak® body-pack transmitter
- Available in 7 system configurations
Specifications:
Overall System Specifications | |
| Operating Frequency | VHF high band, 169 MHz to 172 MHz |
| Number of Channels | Fixed channel |
| Frequency Stability | ±0.005% |
| Modulation Mode | FM |
| Maximum Deviation | ±15 kHz |
| Operating Range | 200' minimum |
| Operating Temperature Range | 40° F (4° C) to 110° F (43° C) |
| Frequency Response | 80 Hz to 13 kHz |
Body Pack Transmitter Specifications | |
| RF Power Output | Under federal regulations |
| Dynamic Range | >=90 dB, A-weighted |
| Input Connections | High impedance, low impedance, bias |
| Battery | 9V (NEDA type 1604) alkaline, not included |
| Current Consumption | 30 mA typical |
| Battery Life | Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) |
| Dimensions | 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D |
| Net Weight | 2.8 oz (78 g) |
Handheld Transmitter Specifications | |
| RF Power Output | 10 mW High position, 2 mW Low position, typical |
| Spurious Emissions | Under federal regulations |
| Dynamic Range | >=90 dB, A-weighted |
| Microphone Element | Dynamic unidirectional |
| Battery | 9V (NEDA type 1604) alkaline, not included |
| Current Consumption | 30 mA typical |
| Battery Life | Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) |
| Dimensions | 9.50" (241.3 mm) long, 2.10" (53.3 mm) diameter |
| Net Weight | 12.7 oz (360 g) |
| Accessory Included | AT8456a Quiet-Flex™ stand clamp |
Receiver Specifications | |
| Receiving System | Non-diversity, single-channel, dual antenna system |
| Image Rejection | 50 dB minimum |
| Signal-to-noise Ratio | 80 dB at 10 kHz deviation (IEC-weighted), maximum modulation 15 kHz |
| Total Harmonic Distortion | <=1% (10 kHz deviation at 1 kHz) |
| Sensitivity | 20 dBµV for 60 dB S/N (IEC-weighted) |
| Audio Output | 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) |
| Output Connector | 1/4" TS ("mono") phone jack |
| Power Supply | 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center positive, with external DC supply |
| Dimensions | 8.27" (210.0 mm) W x 1.72" (43.5 mm) H x 4.73" (120.0 mm) D |
| Net Weight | 18.9 oz (536 g); without AC adapter, 11.9 oz (336 g) |
| Accessories Included | AD1202A 120V docking AC adapter; 120V AC IEC cordset |
